Limited Time Offer^
^ For a limited time only, purchase a new 325HE4 for $1,299.00. Effective 01/02/19 - 31/03/19, while stocks last at participating Husqvarna Servicing Dealers only.
Smart Start®
The engine and starter have been designed so the machine starts quickly with minimum effort. Resistance in the starter cord is reduced by up to 40%.
Easy Starting
Air purge for very easy starting.
Auto Return Stop Switch
Stop switch automatically resets to the ON position for trouble-free starting.
Intuitive Controls
The choke and purge are easy to reach and understand.
Impact Guard
The rear impact guard protects the engine from damages.
Stand Alone Starter
The stand alone starter makes it easy to change starter cord if needed.
Sharp Teeth
Sharp and robust cutting teeth for high productivity and long product life.
X-torq® Engine
The X-Torq® engine design reduces harmful exhaust emissions by up to 75% and increases fuel efficiency by up to 20%.
Engine Position
The engine position also helps divert exhaust fumes away from the user.
Added Comfort
Offset cutting bar and long shaft for added comfort.
Remote Control
The remote control makes it easy to adjust the cutter bar during operation.
Transport Mode
Cutter bar in transport mode for easy transport and storage.
Long Reach
The cutting bar is designed to give you a long reach, while still allowing you to work ergonomically.
| Vibration & Noise Data | |
| Equivalent vibration level (ahv, eq) front | rear handle / 5.4/2.4 m/sý |
| Sound pressure level at operators ear | 93 dB(A) |
| Sound power level, guaranteed (LWA) | 106 dB(A) |
| Overall Dimensions | |
| Weight | 14.11 lbs / 6.4 kg |
| Engine Specification | |
| Cylinder displacement | 1.55 cu.inch / 25.4 cmü |
| Power output | 1.34 hp / 1 kW |
| Maximum power speed | 8500 rpm |
| Fuel tank volume | 17.25 fl oz / 0.51 litre |
| Fuel consumption | 520 g/kWh |
| Idling speed | 3000 rpm |
| Transmission Data | |
| Gear ratio | 1:5.58 |
| Equipment | |
| Knife Length | 22 inch / 55 cm |
| Knife adjustment range, up/down | 90/85ø |
| Teeth opening | 1.14 " / 29 mm |
| Cutting speed | 4300 cut/min |
